Contact Arrangement: 1A SPNO
Contact Material: Silver alloy,Cu
Termination: 5/16 -24 UNF-2A thread;1/4″-20 UNC-2A thread
|Conti.(A)||Inrush(A)||Electrical Life||Contact Material|
|Temperature Range||Continuous||-20°F~-150°F (-28.9℃~65.6℃)|
|Mechanical Life (no load)||1×105|
|Mounting Position||The installation of a coil upward or levels after is recommended|
Intermittent 30s on maximum and minimum 6 minutes off
|Contact Terminal||(44-55) inch-lbs|
|Coil Terminal||(12-18) inch|
|Volts DC(V)||Coil Resistance(Ω)||Pick up(VDC)||Coil power(W)|
1 Part number: S120
2 Contact arrangement: 1A:1A; 1C:1C;
3 Coil rated voltage(V): DC:3,5,6,9,12,18,24
1) Not all number combinations are available.Please contact your Sales Representative for available part numbers.
2) Solenoids applied in battery charging circuits should be protected from higher than rated voltage during charging.The service life
may be affected by this condition and the solenoid may or may not operate the circuit as intended.
3) Circuits should be designed to provide safe operation should the solenoid fail in either the open or closed position.
4) A back-up wrench must be used to hold the bottom nut stationary during installation.